Repair My Windows And Doors

About Us

The 10 Most Scariest Things About Repairs To Upvc Windows

repairs To upvc Windows (www.repairmywindowsanddoors.co.uk)

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you’re planning to try to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It’s a great idea cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your property until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it’s important to act quickly to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you’ll need to unblock the windows to get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you’ve adjusted the hinges, shut your window and test it for fitting. If you’re satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it’s essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it can also be caused by the handle mechanism getting worn out. It’s relatively simple to fix a loose uPVC handle. First, you’ll need to close the window and then perform an initial test to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it isn’t then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and wet floors. The leaks of water from windows do are not just a cause for destruction of your home’s structure but also hinder your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to “over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in the breeze. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is an easy process, but it’s simpler if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

The issue can be caused due to opening the window in the wrong way or a faulty installation in the factory. Sending us a photo via our website will often solve the issue. We are happy to give assistance.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be misaligned due to wear, creating an opening where the sash and frame meet. This can be easily fixed by giving them a good clean, but when they’re beyond repair, it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it’s feasible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be more cost-effective to simply replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as possible.